How to remove Regal bumper
Recently, the topic of car maintenance has been very popular on major social platforms and forums, especially about the bumper removal method of Buick Regal. This article will combine the popular discussions on the Internet in the past 10 days to provide you with a detailed guide for disassembling the Regal bumper, along with structured data on related tools and precautions.
1. Preparations before disassembly

Before starting to disassemble the Regal bumper, you need to prepare the following tools and materials:
| Tools/Materials | Quantity | Purpose |
|---|---|---|
| Phillips screwdriver | 1 handful | Remove screws |
| Plastic snap pry bar | 1 set | Remove the buckle |
| 10mm socket wrench | 1 handful | Remove bolts |
| gloves | 1 pair | protect hands |
2. Detailed explanation of disassembly steps
1.Disconnect the negative terminal of the battery:For safety reasons, it is recommended to disconnect the negative terminal of the battery first to avoid accidentally triggering the airbag or other electronic devices.
2.Remove the front wheel arch lining:Use a Phillips screwdriver and a plastic snap pry bar to remove the screws and snaps from the front wheel arch lining.
3.Remove the screws at the bottom of the bumper:Kneel down and find the screw at the bottom of the bumper and use a 10mm socket wrench to remove it.
4.Remove the bumper side screws:Open the hood and front door, find the screws on the side of the bumper, and use a Phillips screwdriver to remove them.
5.Separate bumper:Gently pull the bumper outward while paying attention to whether there are any hidden buckles or screws that have not been removed.
3. Precautions
| Things to note | Description |
|---|---|
| Velocity control | Avoid using excessive force when disassembling to avoid damaging the bumper or buckle. |
| Screw storage | Store all disassembled screws and buckles in categories to avoid loss |
| Line check | When disassembling, pay attention to the fog lights, radar and other circuits in the bumper. |
4. Frequently Asked Questions
According to popular discussions in the past 10 days, the following are the issues that car owners are most concerned about:
1.What should I do if the bumper cannot be removed?It may be that the hidden screws have not been removed. It is recommended to check under the hood and inside the wheel arch.
2.How to replace the buckle if it is broken?You can buy universal plastic buckles, the price is usually 5-10 yuan/pack.
3.Is it necessary to do a four-wheel alignment after disassembly?Simply removing the bumper does not require a wheel alignment.
5. Hot topic data on the entire network
| Platform | Topic popularity | amount of discussion |
|---|---|---|
| car home | high | 1200+ |
| Zhihu | in | 800+ |
| Douyin | high | 1500+ |
| Station B | in | 600+ |
With the above steps and precautions, you should be able to successfully complete the disassembly of the Regal bumper. If you encounter any problems during operation, it is recommended to refer to the official maintenance manual or consult a professional technician.
check the details
check the details