How to make heating fixed bracket
As winter approaches, heating installation has become a focus for many families. The installation of the heating fixing bracket is a key step to ensure the stable and safe operation of the radiator. This article will introduce in detail the production and installation methods of the heating fixed bracket, and combine it with the hot topics and hot content on the Internet in the past 10 days to provide you with a practical reference.
1. Manufacturing steps of heating fixed bracket
1.Material preparation: The following materials are required to make the heating fixing bracket:
| Material name | Specifications | Quantity |
|---|---|---|
| Angle steel | 40mm×40mm×4mm | 2 sticks |
| expansion bolt | M8×80mm | 4 |
| screws | M6×20mm | 8 |
| Gasket | M6 | 8 |
2.Measure and cut: According to the size of the radiator, measure and cut the angle steel to ensure that the length of the bracket matches the width of the radiator.
3.Drilling: Drill holes in the angle steel to fix the radiator and wall. The hole spacing should be determined according to the installation hole position of the radiator.
4.Mounting bracket: Fix the angle steel bracket to the wall with expansion bolts, making sure the bracket is level and firm.
5.fixed radiator: Place the radiator on the bracket and fix it with screws and washers to ensure that the radiator is stable and does not shake.
2. Hot topics and content on the entire network in the past 10 days
The following are the topics and hot content related to heating installation that have been hotly discussed on the Internet in the past 10 days:
| hot topics | Discussion popularity | Main content |
|---|---|---|
| Winter Heating Installation Guide | high | Share the precautions and tips for heating installation |
| Radiator fixing bracket DIY | in | Netizens share their experience in making homemade heating brackets |
| Emergency treatment for heating water leakage | high | Discuss quick solutions to heating leaks |
| Tips for saving energy in heating | in | How to optimize heating efficiency with fixed brackets |
3. Precautions for heating fixed brackets
1.security: The bracket must be firm to prevent the radiator from falling off or leaking due to looseness.
2.levelness: When installing, you need to use a level to ensure that the bracket is level, otherwise it will affect the heat dissipation effect of the radiator.
3.Material selection: The quality of angle steel and expansion bolts directly affects the load-bearing capacity of the bracket. It is recommended to choose high-quality materials.
4.Regular inspection: During use, the stability of the bracket should be checked regularly and loose screws should be tightened in time.
4. Frequently Asked Questions
1.Q: Can the heating bracket be made by myself?
A: Yes, but you need to ensure that the material quality and installation technology are up to standard. Otherwise, it is recommended to ask professionals for installation.
2.Q: What should I do if the radiator is not hot after the bracket is installed?
A: It may be that the bracket is installed unevenly, causing the water flow inside the radiator to be sluggish. The level of the bracket needs to be readjusted.
3.Q: How to deal with rust on the bracket?
A: You can spray anti-rust paint or replace the stainless steel bracket to prevent corrosion from affecting safety.
5. Summary
The production and installation of heating fixing brackets are important links for the safe operation of the heating system. Through the introduction of this article, you can follow the steps to DIY the bracket, and refer to hot topics on the Internet to learn more practical tips. If you have any questions about the installation process, it is recommended to consult professional technicians to ensure the quality of the installation.
check the details
check the details
en
