How to calculate the size of the wine rack
In home decoration or bar design, the calculation of the size of the wine rack is a key link. A reasonable lattice size of the wine rack can not only enhance the aesthetics, but also ensure the stable storage of the wine bottles. This article will combine popular topics and hot contents on the entire network for the past 10 days to introduce you in detail the calculation method of the lattice size of the wine rack and provide structured data for reference.
1. Basic requirements for the size of the wine rack lattice
The size of the wine rack lattice must be determined based on the type and quantity of the wine bottles. Here are the size references for common wine bottles:
| Wine bottle type | Height (mm) | Diameter (mm) |
|---|---|---|
| Standard red wine bottle | 300-320 | 75-80 |
| Champagne bottle | 320-350 | 85-90 |
| Whiskey bottle | 250-280 | 70-75 |
2. Calculation method of wine rack lattice size
1.Single-layer wine rack lattice size: Taking the red wine bottle as an example, the height of the lattice should be 20-30mm higher than the height of the wine bottle, which is easy to pick up and put. The width is adjusted according to the diameter of the bottle and the placement method (laying horizontally or vertically).
2.Multi-layer wine rack lattice size: If you design a multi-layer wine rack, the floor height and load bearing need to be considered. The height of each layer is recommended to be 1.2-1.5 times the height of the wine bottle, and the thickness of the layer plate is recommended to be ≥20mm.
3.Inclined wine rack lattice size: The inclined design can save space. The inclination angle is recommended to be 10-15 degrees. The depth of the lattice needs to be adjusted according to the length of the bottle.
| Wine rack type | Grid height (mm) | Grid width (mm) | Grid depth (mm) |
|---|---|---|---|
| Single layer vertical | 350-400 | 100-120 | 300-350 |
| Multi-layer horizontal layout | 120-150 | 300-350 | 400-450 |
| Tilt | 300-350 | 100-120 | 350-400 |
3. Hot topics across the Internet: Wine rack design trends
According to the hot content in the past 10 days, the following wine rack design trends have attracted much attention:
1.Modular wine rack: A modular design that can be combined freely, suitable for flexible adjustment of small spaces.
2.Invisible wine rack: Design embedded in the wall, saving space and beautiful.
3.Smart wine rack: High-end wine rack equipped with temperature and humidity control and LED lighting.
4. Things to note when lattice size of wine rack
1. Leave ventilation space to prevent the bottle from getting damp.
2. Consider load-bearing capacity, especially multi-layer wine racks.
3. Adjust the grid size according to actual needs to avoid wasting space.
Through the above data and calculation methods, you can easily design the size of the wine rack lattice that meets your needs. Whether it is a home use or a commercial place, reasonable sizing can improve the functionality and aesthetics of the wine rack.
check the details
check the details
en
